In the United States, the ratite industry consists of ostriches, emus, and:
A. kiwis
B. cassowary
C. wild turkeys
D. rheas
Answer: D
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. An angularity tolerance is a geometric tolerance that limits the amount a surface, axis, or center plane is permitted to deviate from a basic angle relative to a datum reference frame. 2. When angularity is applied to a surface, the tolerance zone applies to the axis or center plane of the unrelated actual mating envelope. 3. When an angularity tolerance is applied to a feature of size, the feature control frame is placed below or beside the size dimension. 4. When an angularity tolerance is applied to a planar surface, the angularity deviation of a surface is verified by finding the distance between two parallel planes, at a specified angle, that all of the points of the surface are located between. 5. When an angularity tolerance (at MMC) is applied to a feature of size, the angularity deviation is often verified by either passing an internal feature of size through a virtual condition boundary (a functional gage) or passing a virtual condition boundary (a functional gage) into an external feature of size.
Considering the variability of the specific heats of air, plot the change in specific enthalpy of air as it is heated from an initial temperature of 0°C to final temperatures ranging from 100°C to 1000°C.
Given: T1 = 0°C What will be an ideal response?
What are 480-volt systems desired for in many modern installations?
What will be an ideal response?
Which ONE of the following statements is TRUE?
A. all two-speed axles use double-reduction B. double-reduction axles are always two-speed axles C. all tandem drive axles are double-reduction D. single-reduction axles are seldom used in trucks