Referring to the figure shown below, an open circuit between SW 0 and the associated body controller input terminal would result in which of the following with the wiper switch in the Low position?
A. Body controller would detect wiper switch as being in the High position.
B. Body controller would detect wiper switch as being in the Low position.
C. Body controller would detect wiper switch as being in the Int 1 position.
D. None of the above
Answer: A
You might also like to view...
What are some questions that builders of earlier fortresses could easily answer but that builders of angled wall fortresses could not?
What will be an ideal response?
What suspension component is used to counteract body lean during cornering?
A) Torsion bar B) Strut rod C) Stabilizer bar D) Control arm
What is the maximum length of a straight or roof ladder that can be carried safely by one fire fighter?
a. 12 ft b. 16 ft c. 18 ft d. 14 ft
The magnetic circuit shown in Figure P18.11 has two parallel paths. Find the flux and flux density in each leg of the magnetic circuit. Neglect fringing at the air gaps and any leakage fields. N = 1,000 turns, i = 0.2 A, lg1 = 0.02 cm, and lg2 = 0.04 cm. Assume the reluctance of the magnetic core to be negligible.
