Use a sketch and notes to illustrate two methods of attachment when gypsum board is used as a finish ceiling material.
What will be an ideal response?
See the Instructor's Manual (IM).
You might also like to view...
Answer the following statements true (T) or false (F)
1. The center-to-center spacing of vertical reinforcement in a CMU wall cannot be less than 8 in. 2. The terms pilaster and pier are synonymous. 3. A split-face CMU is made by treating a standard CMU with an oxyacetylene torch to produce a very smooth surface on one or more faces of the unit. 4. A burnished CMU is made by treating a standard CMU with an oxyacetylene torch to produce a very smooth surface on one or more faces of the unit.
When arc welding, the general rule is that arc length should be _____.
a. half the electrode diameter b. equal to the electrode diameter c. twice the electrode diameter d. slightly less than the electrode diameter
Memory enable, chip enable, and chip select are terms used to describe a memory function that will completely disable all or part of the memory so that it will not respond to other inputs
Indicate whether the statement is true or false
Problem 1.31
The 1.4-kip load P is supported by two wooden members of uni¬form cross section that are joined by the simple glued scarf splice shown. Determine the normal and shearing stresses in the glued splice.
