Downshifting too early can result in the vehicle having too much speed for the next lower gear, which can cause the engine to rev beyond its operating range and to stress its parts.
Answer the following statement true (T) or false (F)
True
You might also like to view...
? In the design-build delivery model, communication is typically flows between the ___________________ and the design-build firm's project manager.
Fill in the blank(s) with the appropriate word(s).
In a current direct injected diesel engine governed at 2000 rpm, what droplet size range must the injection system produce?
A. 1 - 10 microns B. 10 - 100 microns C. 100 - 200 microns D. 200 - 500 microns
Answer the following statement(s) true (T) or false (F)
1.Schedule 40 rigid polyvinyl chloride (Type PVC) conduit has a smaller inside diameter than Schedule 80 rigid nonmetallic PVC conduit. 2.On a duplex receptacle, the silver screw is used to terminate the white grounded conductor of a 120-volt residential branch circuit. 3.On a GFCI receptacle, the incoming power is connected to the line terminals. 4.Manufacturers of nonmetallic sheathed cable color code a 12/2 Type NM cable with the color orange. 5.A wirenut is the most common wire connector used by electricians to splice together two or more conductors.
A vehicle equipped with a coil spring front suspension and a leaf spring rear suspension "dog tracks" while driving on a straight, level road. Technician A says that a broken center bolt could be the cause. Technician B says defective rear shock absorbers could be the cause. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician