Compute the vertical and horizontal deflection at B and at the midspan of member CD in Figure P8.38. Consider both axial and bending deformations. Given: E = 29,000 kips/in. 2 , I = 180 in. 4 , area of column = 6 in. 2 , area of girder = 10 in. 2
You might also like to view...
The requirement that foundations must be built in excavations that are "in the dry" means that _____.
a. water cannot be applied during compaction b. the excavations must be free of water c. work must be stopped on rainy days d. groundwater barriers must be installed
What are the two characteristics of the runout tolerance?
What will be an ideal response?
Which type of port fuel-injection system uses a fuel temperature and/or fuel-pressure sensor?
A) Demand delivery systems B) Electronic returnless systems C) All port fuel-injected engines D) TBI units only
The first check when answering a no-heat oil furnace call should be
A) Checking to see if there is oil in the tank and if the oil is clean B) Checking the output of the ignition transformer C) Checking the cad cell circuit D) Checking the fan switch setting