A vehicle is equipped with longitudinal torsion bars attached to the front lower control arms. Technician A says that this vehicle has loaded lower ball joints. Technician B says that the ball joints on this vehicle should be unloaded to test for radial and axial play. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
C
You might also like to view...
Technician A says that the purpose of the intake air temperature (IAT) sensor is to provide the engine computer (PCM) with the temperature of the air in the cylinders. Technician B says that the IAT sensor information is used for fuel control (adding or subtracting fuel) and spark timing, depending on the temperature of incoming air. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
If the contacts of a current relay remain closed after the motor has reached operating speed, what will likely result?
What will be an ideal response?
Table 23-1 shows there is no waste material and output rate is low for which manufacturing method?
?
A. ?blow molding B. rotational casting C. ?vacuum bag D. ?extrusion
Si un cable se clasifica como 6 x 19 Seale IWRC, el 6 representa _____.
a. la cantidad de alambres en cada torón b. la cantidad de torones en un cable c. el diámetro del cable d. el grado de acero utilizado