What pump should be used in used in high-volume, high-pressure applications such as boiler-feed water pumps?
A. Single-stage centrifugal pump
B. Multistage centrifugal pump
C. Positive displacement pump
D. Reciprocating pump
A. Incorrect. A multistage centrifugal pump is used in high-volume, high-pressure applications such as boiler-feed water pumps.
B. Correct. A multistage centrifugal pump is used in high-volume, high-pressure applications such as boiler-feed water pumps.
C. Incorrect. A multistage centrifugal pump is used in high-volume, high-pressure applications such as boiler-feed water pumps.
D. Incorrect. A multistage centrifugal pump is used in high-volume, high-pressure applications such as boiler-feed water pumps.
You might also like to view...
The live load that shoring must support mostly consists of the _____.
a. forms b. workers and equipment c. concrete d. reinforcement
How a product is displayed has little impact on how well the product sells
Indicate whether the statement is true or false.
Which of the following would you NOT expect to be true at the new steady state (compared to normal operation)?
An ammonia synthesis process normally works as follows: Fresh feed air and hydrogen are combined with a recycle stream and the combined stream is compressed to 10 MPa. The compressed stream enters a reactor, and the entering nitrogen and hydrogen are converted into ammonia until the reaction reaches equilibrium. The reactor effluent, still at 10 MPa, enters a condenser. The liquid and vapor streams leaving the condenser are in VLE. The liquid stream, which is essentially pure ammonia, is the product. A fraction of the vapor stream leaving the condenser is purged, while the rest is recycled. There is a problem with the compressors and the pressures of the reactor and the condenser both drop to 9 MPa. The fresh feed rate and the fraction of vapor leaving the condenser that is purged each remain the same, as do the reactor and condenser temperatures. The system reaches a new steady state at 9 MPa.
Technician A says heater temperature may be controlled by regulating the amount of coolant flowing
through the heater core. Technician B says heater temperature may be controlled by regulating the amount of air flowing through the heater core. Which technician is correct? A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B