In the above figure, when the stop button is pressed, the N.O. CR contacts are ____________________ (open, closed) and the current through the armature _______________________________________ (flows through the resistor, is supplied through the motor control circuitry).
Fill in the blank(s) with the appropriate word(s).
open, flows through the resistor
You might also like to view...
Within the living room, an area approximately 12' in diameter should be provided for the primary seating area.
Answer the following statement true (T) or false (F)
How is the fuel evaportion or refrigration ice formedin the carburetor?
A. increase in coolant temperature resulting from the condensation B. decrease in coolant temperature resulting from the condensation C. increase in air temperature resulting from the evaporation D. decrease in air temperature resulting from the evaporation E. none of the above
The rear wheels on a tandem drive axle will not turn but the drive axle to the rear differential carrier does turn. Which of the following should you do FIRST?
A. pull the power divider B. pull the forward differential carrier C. pull the rear differential carrier D. pull both rear axle half-shafts
____________________ can be used to reduce the amount of voltage applied to the motor during inching, or reactors or resistors can be connected in series with the motor to reduce the current supplied by the power line.
Fill in the blank(s) with the appropriate word(s).