Which of the following is NOT used as CV joint boot material?
A) Natural rubber B) Hard thermoplastic
C) Silicone rubber D) Rubber impregnated canvas
D
You might also like to view...
An ideal autotransformer with a 1:4 step-up turns ratio has its secondary connected to a 120-? load and the primary to a 420-V source. Determine the primary current.
What will be an ideal response?
What is the difference between the compressor operating temperatures in an air-cooled condenser and a water-cooled condenser?
A) A water-cooled condenser operates 15°F below an air-cooled condenser. B) A water-cooled condenser operates 25°F above an air-cooled condenser. C) A water-cooled condenser operates 15°F above an air-cooled condenser. D) A water-cooled condenser operates 25°F below an air-cooled condenser.
A J-K flip-flop is being used as a divide-by-2 circuit when ________
A) the J and K inputs are tied to Vcc B) the J and K inputs are tied to ground C) the reset is tied to the clock D) all the inputs are connected to the preset
Transmissions are designed to go into a(n) "____________________" mode if the computer detects a failure.
Fill in the blank(s) with the appropriate word(s).