Referring to the figure shown below, a disconnected wiper switch would cause which of the following?

A. DTC for wiper switch with an FMI indicating out of range high generated by body controller
B. Body controller would detect wiper switch as being in the OFF position.
C. Body controller would detect wiper switch as being in the High position.
D. DTC for wiper switch with an FMI indicating out of range low generated by body controller


Answer: C

Trades & Technology

You might also like to view...

Raising the end of the electrode too high or moving it too far ahead of the molten weld pool can cause ____.

A. the weld pool to harden B. burn-through C. all of the shielding gas to be blown away from the molten weld pool D. slag and metal to be deposited ahead of the weld bead

Trades & Technology

 Technician A says wheel offset is  the distance between the centerline of the rim and the mounting plane of the wheel. Technician B says the scrub radius is the distance from the tire contact patch centerline to the point where the steering axis intersects the road. Who is correct?

A. A only B. B only C. Both A and B D. Neither A nor B

Trades & Technology

One advantage of PLDs over fixed-function logic devices is that many more logic circuits can be stuffed into a much smaller area

Indicate whether the statement is true or false

Trades & Technology

Circuits that contain features such as common-mode rejection, isolation, gain, etc. are called:

A) signal conditioners. B) thermocouples. C) interfaces. D) none of the above.

Trades & Technology