Find i? in the circuit in Fig. 10.93 using superposition.
 FIGURE 1.png)
 figure 2.png)
 figure 3.png)
 FIGURE 4.png)
 ANSWER.png)
You might also like to view...
Two technicians are discussing heat movement. Technician A says that heat is a form of energy. Technician B says that heat travels from hot to cold. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
In a standing-seam metal roof, the roof panels are ________.
A) site formed from a prefinished sheet-metal roll. B) shop formed and site finished. C) shop formed and shop finished. D) any one of the above.
All of the following statements about wheel rims are true EXCEPT:
A. A wheel rim with negative offset has the center of the tire positioned inboard from the vertical wheel mounting surface B. Wheel rims must position the tires at the proper distance inward or outward from the vertical wheel mounting surface C. A wheel rim with positive offset has the center of the tire positioned outboard from the vertical wheel mounting surface D. A wheel rim with negative offset has the center of the tire positioned outboard from the vertical wheel mounting surface
Pushrod adjustment ________
A) Should be checked when a new booster is installed B) Is recommended on ALL models C) Is accomplished by holding the pushrod stationary and holding a self-locking nut. D) Never needs to be checked