Garnet is used as an abrasive in many cutting systems

Indicate whether the statement is true or false


TRUE

Trades & Technology

You might also like to view...

Which of the listed factors is not considered when calculating the minimum parts of line required for a lift?

a. Suspended weight during lift b. Crane’s minimum line pull during lift c. Boom angle during the lift d. Type of hoisting sheave bearings

Trades & Technology

The U.S. Department of Labor reports that animal breeders earn about $34,000 annually

Indicate whether the statement is true or false

Trades & Technology

In fillet welds, the weld position is determined by the orientation of the workpiece and the _____

a. axis of the weld b. size of the weld c. profile of the weld d. convexity of the weld

Trades & Technology

Combustion air for gas appliances should be:

A) 10 cu ft of combustion air per 1,000 BTU of firing rate. B) Recycled by piping the vent gases back into the combustion air intake. C) 1 cu ft of combustion air for every cubic foot of gas. D) 14 to 15 cu ft of combustion air per 1,000 BTU of firing rate.

Trades & Technology