Cables not installed on the face do not require ____.
A. insulation
B. guard strips or running boards
C. switch plates
D. stapling
Answer: B
You might also like to view...
Which of the following statements is LEAST-Likely true?
A. Exhaust systems can rust out because there are acids and a good deal of moisture in the engine's exhaust. B. An engine that is never fully warmed up will experience rapid rusting in the exhaust system because the moisture never gets a chance to dry out. C. Mufflers often rust out on the highest end. D. Usually the first clue that there is a leak in the exhaust system is the sound of leaking exhaust.
When running passes (other than the root) on open-root V-groove pipe welds in the 2G position, use stringer
beads and a slight circular or side-to-side motion to ensure fusion at the _____. a. face of the weld bead b. toes of the weld bead c. root of the weld bead d. leg of the weld bead
What change would decrease the power factor in Figure 12-2?
A) Decrease the source voltage. B) Decrease the value of the resistor. C) Increase the value of the resistor. D) Increase the source voltage.
A working drawing that provides information for the manufacture of a single part is a(n) ____________________ drawing.
Fill in the blank(s) with the appropriate word(s).