Typical maximum rotor thickness variation (parallelism) specifications are ________
A) 0.300 to 0.500 in. (8.0 to 13 mm) B) 0.0003 to 0.0005 in. (0.008 to 0.013 mm)
C) 0.030 to 0.050 in. (0.8 to 1.3 mm) D) 0.003 to 0.005 in. (0.08 to 0.13 mm)
B
You might also like to view...
In confinement housing, _____ controls are among the most important considerations
a. size c. light b. temperature d. space
Which part of Europe experienced pogroms against Jews during the 1890s and 1900s?
a. Austria b. Germany c. Russia d. France
Technician A says that as the clutch drive hub is replaced, the air gap should be checked at three different places. Technician B says that the air gap is not important as long as the clutch ohms are correct. Who is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
Unless otherwise specified, a weld ___________________________________ the thickness of the parts at the joint.
Fill in the blank(s) with the appropriate word(s).