To flower, the walnut tree requires temperatures below 45ºF (7ºC) for _____ hours

A) 500 to 1,000
B) 150 to 250
C) ?a maximum of 300
D) approximately 100


A

Trades & Technology

You might also like to view...

What tool can be used to verify the movement of a solenoid pintle?

A) Boroscope B) Digital storage oscilloscope C) Thermal imager D) Stethoscope

Trades & Technology

What precautions should be taken when charging liquid through the suction service valve?

a. When the compressor starts knocking close down the charging valve a little. b. Restrict the flow of liquid if the amperage is above 10% of RLA or the valve frosts. c. Make sure the condensing temperature is within 30° of the ambient air.

Trades & Technology

Technician A says that the most heat transfer happens when there is a large difference in temperature between two objects. Technician B says that the highest engine emissions typically occur during cold startup, before the engine reaches operating temperature. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians D) Neither technician

Trades & Technology

A load is modeled as a 100-mH inductor in parallel with a 12-? resistor. A capacitor is needed to be connected to the load so that the network is critically damped at 60 Hz. Calculate the size of the capacitor.

What will be an ideal response?

Trades & Technology