To obtain a passenger P endorsement you must pass a Knowledge Test on
a- hazardous materials and transporting passengers safely.
b- combination vehicles and transporting passengers safely.
c- tank vehicles and transporting passengers safely.
d- driving safely and transporting passengers safely.
Answer : d- driving safely and transporting passengers safely.
You might also like to view...
An uninsulated gas turbine receives air at 1000 kPa, 800oC, at a mass flow rate of 12.0 kg/s. The air exits at 100 kPa, 420oC. The turbine produces 4.10 MW of power.
(a) Determine the heat transfer rate for the turbine. (b) Using your turbine model, plot the required heat transfer rate for exit temperatures varying between 400°C and 500°C, with the other conditions remaining the same. (c) Using your turbine model and the original conditions, plot the variation in power produced as the heat transfer rate varies between 0.0 MW and -3.0 MW. Given: P1 = 1000 kPa; T1 = 800°C; P2 = 100 kPa; T2 = 420°C; m?= 12.0 kg/s; W?=4.10 MW=4,100 kW; Air (Take State 1 as the inlet, State 2 as the outlet.) Assume: For a turbine, assume steady-state, steady-flow, single-inlet, single-outlet flow, with ?KE = ?PE = 0
What is the minor axis of an ellipse with a major axis of 1.80 meters and an area of 2.40 square meters? Round the answer to 2 decimal places.
Fill in the blank(s) with the appropriate word(s).
As the relative humidity increases, the efficiency of an electrostatic filter increases.
Answer the following statement true (T) or false (F)
Refer to Figure P2.49 and assume R0 = 2 ?, R1 = 1 ?, R2 = 4/3 ?, R3 = 6 ?, and VS = 12 V. Use KVL and Ohm’s law to find:
Known quantities:
Schematic of the circuit shown in Figure P2.55 with resistors R0 = 2 ?, R1 = 1 ?, R2 = 4/3 ?, R3 = 6 ?, and VS = 12 V. and voltage source Vs=12V.
a. The mesh currents ia , ib, and ic.
b. The current through each resistor.