In a tractor jackknife, _____ is needed to put the tractor back on course.
Fill in the blank(s) with the appropriate word(s).
corrective steering
You might also like to view...
Before the advent of CAD and analysis tools, which stage of the design process involved building and testing physical models?
A. concept generation B. problem identification C. design evaluation and analysis D. concept selection and refinement
Generally, any location with an annual average wind speed of ____________________ miles per hour or greater has sufficient wind energy to drive a turbine enough hours each year to make the system cost effective.
Fill in the blank(s) with the appropriate word(s).
What voltage will be found in the orange HEV cables?
A) 144 to 600 volts B) 36 to 42 volts C) 12 volts D) 42 volts
After completing a TMC wheel end adjustment which of the following confirms that the adjustment is as specified?
A. preload drag of 5-inch pounds (0.56 N.m) measured with fishscale B. preload drag of 5-foot pounds (7 N.m) measured with torque wrench C. endplay of 0.001-inch to 0.005-inch (0.025 to 0.127 mm) measured with a dial indicator D. endplay within 0.010-inch (0.254 mm) measured with a dial indicator