The diac is a __________-layer device.
A. three
B. four
Answer: A
You might also like to view...
An on-line manufacturing work cell performs a series of four quality control tests on a manufactured product. Design a logic system that will simultaneously examine the results of all four tests and decide into which of the three output containers the piece will drop. A, B, C, and D are identified as four tests or inputs to the logic system. Bins #1, #2, and #3 are classified as outputs. If the product passes two OR three tests, Bin #1 will receive the part. If it passes one of the tests, Bin #2 will be open. Bin #3 accepts perfect units only.
What will be an ideal response?
To forward bias a silicon diode ________
A) The voltage at the anode must exceed the voltage at the cathode by 0.3 to 0.5 volt B) The anode must be connected to a resistor (300-500 ohms) and 12.0 volts, with the cathode also connected to 12.0 volts C) The voltage at the cathode must exceed the voltage at the anode by 0.3 to 0.5 volt D) The voltage at the anode must exceed the voltage at the cathode by 0.5 to 0.7 volt
If a fitting has grooves cut into the flats, this means that it connects to the ____.
A. blowtorch B. regulator C. oxygen system D. acetylene system
What is debugging?
What will be an ideal response?