Which of the following best describes why we say that light is an electromagnetic wave?
A) The passage of a light wave can cause electrically charged particles to move up and down.
B) Light can be produced only by electric or magnetic appliances.
C) Light is produced only when massive fields of electric and magnetic energy collide with one another.
D) The term electromagnetic wave arose for historical reasons, but we now know that light has nothing to do with either electricity or magnetism.
A) The passage of a light wave can cause electrically charged particles to move up and down.
You might also like to view...
The ____ of a radio telescope collects and focuses radiation
a. lens b. dish c. mirror d. antenna e. computer
A student pulls a box of books on a smooth horizontal floor with a force of 100 N in a direction of 37.0° above the horizontal. The mass of the box and the books is 40.0 kg. (a) Draw the free-body diagram for the box
(b) Calculate the acceleration of the box. (c) Calculate the normal force acting on the box.
An incompressible fluid is flowing through a pipe with a constriction. The pipe is on an incline with an angle of 30.0 degrees. The narrow section is 10.0 m from the wide section and the narrow section is higher than the wide section. The velocity of the fluid in the wide section of the pipe is 4.00 m/s and the velocity of the fluid in the narrow section of pipe is 9.00 m/s. The pressure of the fluid in the wide section is 250 kPa. What is the pressure in the narrow section of the pipe? (density of the fluid is 1000
A. 169 kPa B. 175 kPa C. 180 kPa D. 193 kPa E. 205 kPa
A drive shaft resists torsional shear stress of ?xy 5 40 MPa and axial compressive stress ?x 5 70 MPa. One principal normal stress is known to be 38 MPa (tensile). The stress ?y is approximately:
(A) 23 MPa
(B) 35 MPa
(C) 62 MPa
(D) 75 MPa