Item 6 is pointing to the _____.
a. center chord
b. slope
c. tension web
d. compression web
Answer: D
You might also like to view...
Steel shafts, 1.4 inches in diameter, are turned on an automatic machine. One finishing operation is required for an 11.5-inch length of cut. The tool feed is 0.023 inch per revolution using a cutting speed of 200 feet per minute. Using the formulas in the accompanying figure, determine the number of hours of cutting time required for 1500 shafts. Round the answer to the nearest hour.
What will be an ideal response?
GMA welding machines have ____ duty cycle.
A. 20 percent B. 60 percent C. 80 percent D. 100 percent
The alternating current produced by the AC generator is rectified into direct current (DC) through the use of ______.
A. transistors B. electromagnetic relays C. diodes D. capacitors
The term ____ refers to the shape or contour of a specific parcel of land.
A. oriel B. corbel C. terrain D. solar orientation