Repeat Problem 9.16, using the offset diode model.
Problem 9.16
Find expressions for the voltage vo in Figure P9.16, where D is an ideal diode, for positive and negative values of vS . Sketch a plot of vo versus vS .
Analysis:
As per the problem statement, represent the diode using the offset diode model, which is shown in equation 9.9. The offset diode model is an ideal diode in series with a battery of voltage drop:
V_?=0.6 V
When the voltage drop across R_1, V_1, is less than V_?, the diode is reverse biased and the output is:
v_o=0 V
You might also like to view...
?Technician A says that oil pressure that fluctuates from high to low can be caused by a sticking oil pump pressure relief valve. Technician B says that a stuck-closed pressure relief valve will result in high oil pressure at idle (at normal operating temperature). Who is right?
A. ?Technician A only B. ?Technician B only C. ?Both A and B D. ?Neither A nor B
Before opening a radiator, test for pressure in the system by _____ the top radiator hose.
What will be an ideal response?
When below grade buildings are located under driving surfaces, it is essential that firefighters conduct preincident planning to:
A. identify the cables that anchor the roof to the ground. B. determine if automatic sprinkler protection is required. C. ensure fires exceeding four hours will not cause structural damage. D. address the potential for collapse due to the weight of the apparatus.
A clogged EGR could cause excessive ________ exhaust emissions
A) CO B) HC C) CO2 D) NOx