Compared to relay logic systems, solid-state logic systems:

A) Use less power to operate.
B) Consume about the same amount of power to operate.
C) Use more power to operate.
D) Consume no power to operate.


A

Trades & Technology

You might also like to view...

Technician Asays glazed or worn linings are the most common cause of drum brake problems. Technician B says suchproblems include hard pedal, pulling to one side, wheel locking, brake chatter, excessive pedal travel, noisy brakes, grabbing brakes, or little or no braking power. Who is correct?

A. A only B. B only C. Both A and B D. Neither A nor B

Trades & Technology

Which of the following will have most influence in determining the volume of oil moved through a pump described as fixed displacement?

A. inlet flow area B. outlet flow area C. restriction downstream from outlet D. rotational speed of pump

Trades & Technology

Give the basic function of the roof plan

What will be an ideal response?

Trades & Technology

?What is different about the collector circulator for drainback-protected systems as compared with that of antifreeze-protected systems?

A. ?It only needs a single circulator as opposed to two circulators. B. ?It must not allow air bubbles to be entrained in the return piping. C. ?It must lift water from the static water level in the tank to the top of the collector array. D. ?It must have potential for overcoming increased frictional head loss in the collector piping.

Trades & Technology