What is a corner weld?

What will be an ideal response?


A corner weld is one made on edges laid together to form a corner.

Trades & Technology

You might also like to view...

Which of the following is NOT a leading cause of accidents on the job?

A) Unsafe behavior B) Human error C) Management failures D) Industrial hygiene

Trades & Technology

Technician A says that when making a 5-6 upshift on a 10-speed transmission, the gearshift lever should be moved into the sixth gear position before flipping the range control button into high range. Technician B says that when making a 6-5 downshift on a 10-speed transmission, the range control button should be flipped into low range before the gearshift lever is moved into the fifth gear position. Who is correct?

A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B

Trades & Technology

Because of the downward force produced by the condenser's fan, ____________________ bearings are typically used on the condenser's fan motor.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Condensing temperatures in an air-cooled condensing unit can be reduced by ____.

A. increasing the condensing surface area B. increasing the cfm through the condenser C. decreasing the temperature of the air entering the condenser D. all of the above

Trades & Technology