To eliminate air voids when preparing a splice, pencil the insulation and then _____.
a. buff it using abrasive cloth
b. heat it to soften the edges
c. apply a layer of Teflon® tape
d. apply a thin layer of putty
a. buff it using abrasive cloth
You might also like to view...
A negative 90 degree rotation is equivalent to a positive ____ degree rotation.
A. 90 B. 180 C. 270 D. 360
In pure post-and-beam construction, the exterior walls have widely spaced posts, where the space is filled in with nonload-bearing curtain walls.
Answer the following statement true (T) or false (F)
The MIL is turned off under any of the following conditions, EXCEPT ________
A) Vehicle is driven on 3 consecutive trips with a warm-up cycle, without detecting a fault B) Codes are cleared with a scan tool C) PCM diagnostic link is grounded D) Power to the PCM is disconnected
____________________ commands focus on extracting specific information from files, such as using the comm command to compare file contents.
Fill in the blank(s) with the appropriate word(s).