The best way to remove a belt from a belt drive is to
A) Loosen the mount on the drive pulley to create slack in the belt
B) Remove the drive pulley from the motor
C) Roll the belt over the edge of the larger pulley
D) Roll the belt over the edge of the smaller pulley
A
You might also like to view...
Technician A says that the torque converter impeller is attached to the flexplate and turns as the engine rotates. Technician B says that the turbine is attached to the flexplate and turns as the engine rotates. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
A P0106 DTC is being discussed. Technician A says a damaged or missing MAP sensor O-ring could be the cause. Technician B says a defective MAP sensor could be the cause. Who is right?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
Area measurements are used to measure:
A) Location within a city. B) The distance between cities. C) The size of a floor in a room. D) The space in a room.
The major subdivision included under Division 3 is ____________.
Fill in the blank(s) with the appropriate word(s).