A secondary standard device ____.

A. should be 10 times more accurate than the transmitter being tested
B. only needs to be half as accurate as the transmitter being tested


Answer: A

Trades & Technology

You might also like to view...

? Identify and state the historical significance of Funding at par.

What will be an ideal response?

Trades & Technology

What could be the problem if a noid light remains on (does not flash) with the engine cranking?

A) Short to ground in the injector ground circuit, or defective PCM B) Blown injector fuse C) High injector resistance D) Low system voltage

Trades & Technology

Before cabinet installation begins, the wall and floor surfaces must be checked for evenness by using a _____

a. transit b. story pole c. straightedge d. carpenter's level

Trades & Technology

Dowel pins must generally be pressed into a hole with an interference tolerance of between 0.002 inches to 0.01 inches, depending on the material and the function of the parts.

Answer the following statement true (T) or false (F)

Trades & Technology