Which of the following methods would produce the most reliable results when drawing a sample for lube oil analysis?
A. oil change: beginning of sump drainage
B. oil change: midway through sump drainage
C. engine running: syringe at mid-sump level
D. engine off, engine hot: syringe at mid-sump level
Answer: D
You might also like to view...
Beef cattle being raised for meat are usually fed in large barns or stables
Indicate whether the statement is true or false
Describe the operation and common usage of the Media-Oriented System Transport (MOST) data bus system.
What will be an ideal response?
Each phase load consists of a 20-ohm resistor and a 10-ohm inductive reactance. With a line voltage of 480 V rms, calculate the average power taken by the load if:
(a) the three phase loads are delta-connected, (b) the loads are wye-connected.
The number of squares of 1' × 8' drop siding (to the nearest square) required for a hip roof structure that is 40'
long and 25' wide with 10' high walls, fifteen 3' × 5' windows, one 8' × 7' garage door, and two 8' × 7' sliding doors is _____. (Assume a waste allowance of 16%.) a. 7 b. 9 c. 11 d. 13