What sheet number should be assigned to the main floor plan?
A. A1
B. A10
C. A100
D. A1.0
Answer: C
You might also like to view...
A(n) ____ feature is a concave feature in which the removed material expands outward anywhere along the depth of the feature.
A. mixed wall B. undercut C. protruding D. ballooning
The sectional view is created by placing an imaginary _________________________ through the object cutting away the area to be exposed.
Fill in the blank(s) with the appropriate word(s).
Technician A says that a pressure check valve should hold system pressure for at least five minutes after the pump is shut off. Technician B says that a defective check valve could cause long cranking time. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
A zener diode is normally used for voltage regulation. A zener diode, however, can also be used for high voltage spike protection if connected ________
A) Positive to anode, negative to cathode B) Positive to cathode, ground to anode C) Negative to anode, cathode to a resistor then to a lower voltage terminal D) Both A and C