En la Figura 3, el componente marcado con 1 es un:
a. contacto de sobrecarga.
b. ensamble del calentador por aleación de fusión.
c. terminal de carga.
d. terminal de reinicio.
a. contacto de sobrecarga.
You might also like to view...
The greatest lift height is provided by the _____ forklift.
a. warehouse b. fixed-mast c. telescoping boom d. four-wheel drive
A 2010 vehicle with TPMS has a flashing TPMS warning lamp. This means ___________
A) The vehicle has a flat tire B) The TPMS has detected a fault with the system C) Either A or B D) Neither A nor B
Structural steel shapes may be straightened by resting one edge of the member against a rigid retainer and then applying pressure with a high-strength plunger apparatus, or steel shapes may be bent when long radius curves are required. What is the most common machine used in these processes?
A. A curvature press B. A bend press C. An arc press D. A warp press
An oil failure control will allow a compressor to operate without oil pressure for ____________________ seconds.
Fill in the blank(s) with the appropriate word(s).