The decimal equivalent of binary 01100001 is ________
A) 9110 B) 10110 C) 9710 D) 11510
C
You might also like to view...
There are the types of BSR reports that the UE can report to the gNB.
A. Regular, Short, Long B. Regular, Periodic, Padding C. Regular, Periodic, Aperiodic D. Periodic, Aperiodic, Semi-persistent
Which part MUST be used when refitting a vehicle from R-12 to R-134a refrigerant?
A) A new condenser B) A new service fitting and a retrofit label C) A high pressure cutoff switch D) Both B and C
Undercut is a groove along the _____ of the weld
a. bottom b. side c. top d. middle
What requirement(s) is/are mandated by OBD II?
A. All manufacturers must redesign their engine control systems so as to operate identically in all respects and according to an EPA-designed engine control system. B. The PCM must turn on the MIL if component and/or system inefficiency results in emission levels exceeding 1.5 times the FTP cut-point (an increase of 50%). C. The PCM must turn on the MIL if component and/or system inefficiency results in emission levels exceeding two times the FTP cut-point (an increase of 100%). D. Both A and C