When should coordinate tolerances be used?.
What will be an ideal response?
ANS:
It is recommended that the use of coordinate tolerances be limited to size dimensions, tangent radii and non-critical chamfers.
You might also like to view...
Cuando se calcula la VA de entrada de un transformador de control, utilice la VA de entrada para todos los siguientes dispositivos del circuito de control, SALVO:
a. el interruptor de límite. b. el relé. c. la luz piloto. d. el contactor.
Which of the following should be at least 18" in length when used to connect a junction box mounted above a suspended ceiling to a fixture installed in a suspended ceiling?
a. Flange hanger b. T-bar clip c. Free conductor d. Fixture whip
A window frame manufacturer is searching for ways to improve revenue from its triple-insulated sliding windows, sold primarily in the far northern areas of the United States. Alternative A is an increase in TV and radio marketing. A total of $300,000 spent now is expected to increase revenue by $60,000 per year. Alternative B requires the same investment for enhancements to the in-plant manufacturing process that will improve the temperature retention properties of the seals around each glass pane. New revenues start slowly for this alternative at an estimated $10,000 the first year, with growth of $15,000 per year as the improved product gains reputation among builders. The MARR is 8% per year and the maximum projection period is 10 years for either alternative. Use (a) payback
analysis, and (b) present worth analysis (for 10 years) to select the more economical alternative. State the reason(s) for any difference in the alternative chosen between the two analyses. (c) Find the payback and present worth values using a spreadsheet. What will be an ideal response?
When using GMAW on aluminum pipe in the 1G-ROTATED position, the work angle for the root pass
should be _____. a. 0 degrees b. 30 degrees c. 45 degrees d. 75 degrees