Which of the following is a correct designation for a township?
a. T7WR2S c. T7NR2W
b. T7SR2N d. T7ER2W
C
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. For a transformer of 600 volts or less, overcurrent protection is permitted. 2. When load taps are made in the tie circuit between transformers, the current-carrying capacity shall not be more than a stipulated percentage (200%) of the rated secondary current of the largest capacity transformer connected to the secondary tie. 3. Transformers may be operated in parallel and protected as a unit if their electrical characteristics are similar. 4. Transformers are required to have a disconnecting means located in sight from the transformer or in a remote location if the transformer is a class 2 or class 3 transformer. 5. The fire hazard potential of oil-insulated transformers is greater than that of askarel-insulated transformers.
A device which can cool a space that is not connected to a building's ventilation system is a(n) ____________________
A. active chilled beam B. passive chilled beam C. variable air volume box D. run around coil
New crawl access, new vents, and new hold down and connectors required for lateral bracing should be represented on the _____.
A. interior elevations B. exterior elevations C. foundation plan D. framing plan
What are the wire bundles around the inside perimeter of the alternator called?
A. Stator windings. B. Field windings. C. Generator coils. D. Rotor winding.