What are rotor blades that move or rotate when steam is applied?

A) Governor
B) Fixed blades
C) Moving blades
D) Rotor assembly


Answer: C
Explanation: A) Incorrect. The governor is used to control the speed of the turbine as steam is channeled through the nozzle.
B) Incorrect. Fixed blades remain stationary when steam is applied.
C) Correct. Moving blades are rotor blades that move or rotate when steam is applied.
D) Incorrect. Within the casing are a shaft and a set of blades called the rotor assembly.

Trades & Technology

You might also like to view...

Slanted letters are intended to suggest the way most people write; so they slant to the right at about what degree of angle?

a. 45 degrees c. 90 degrees b. 60 degrees d. 30 degrees

Trades & Technology

Which of the following expresses flow rate in a hydraulic circuit?

A. feet per second (fps) B. gallons per minute (gpm) C. feet head D. all of the above

Trades & Technology

Normal key-off battery drain (parasitic draw) on a vehicle with many computer and electronic circuits is ________.

a. 20 - 30 milliamperes b. 2 - 3 amperes c. 0.20 to 0.40 A d. 150 to 300 milliamperes

Trades & Technology

Primer surfacer is being mixed at a ratio of 4 parts primer to 2 parts reducer and 1-part hardener. If 54 ounces are needed for the job, how many ounces of primer are needed, how many ounces of reducer are needed, and how many ounces of hardener are needed?

What will be an ideal response?

Trades & Technology