Describe plus-minus dimensioning using a bilateral tolerance format and give an example of equal and unequal bilateral tolerances.
What will be an ideal response?
Plus-minus dimensioning
uses a bilateral or unilateral tolerance format, depending on the
application. Plus-minus dimension values are placed using the plus-minus
symbol (±), for example 12±0.1 or .750±.005. A bilateral tolerance is allowed
to vary in two directions from the specified dimension, as in
The dimension value
is an unequal bilateral tolerance, and the 6.5 ± 0.2 dimension value is called an equal bilateral tolerance.
You might also like to view...
If the synchronous motor operates at subsynchronous speed, the squirrel cage winding may ____ and be damaged.
a. subcool b. restart c. overheat d. reset
A vehicle's oil pressure warning light is on. Technician A says that the pressure sending unit should be replaced and the vehicle re-checked. Technician B says that a mechanical oil pressure gauge should be used to check the oil pressure before replacing the sending unit. Which technician is correct?
A) Technician A B) Technician B C) Both technicians D) Neither technician
How are the indoor sections of mini-split heat pump systems normally installed?
A) The indoor section is installed in an attic or basement and ducted to the conditioned space. B) They are mounted in a window with the refrigerant lines running out the back. C) A large hole must be cut in an outside wall and extra framing added to support the unit. D) They are mounted on the ceiling or hung on a wall.
A 4 ´ 14 (100 ´ 350) notched stringer is typically used for enclosed stairs.
Answer the following statement true (T) or false (F)