Technician A says the inertia switch in fuel systems is a safety device. Technician B says that every fuel system starts with a fuel cap. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technicians A and B
D. Neither Technician A nor B
C. Both Technicians A and B
You might also like to view...
AC generator output decreases as field current increases.
Answer the following statement true (T) or false (F)
Which of the following is NOT a standard mounting dimension for an electric motor?
A) Shaft diameter B) Mounting hold spacing C) Motor circumference D) Shaft centerline to base distance
Which is the most commonly used method for conducting data long distances?
A) Fiber optic cable. B) Coax cable. C) Twisted pair.
The heat input to the diesel cycle is nearest:
The pressure and temperature at the inlet to an ideal diesel cycle, with P-v diagram shown, are 100 kPa and 10ºC. It has a compression ratio of 18 and a cut-off ratio of 2. The maximum temperature in the cycle is 1400ºC. Assume constant
specific heats from Table below for all calculations.
A) 775 kJ/kg
B) 800 kJ/kg
C) 825 kJ/kg
D) 850 kJ/kg