The difference between the theoretical line length of a rafter and the actual cut line length of a rafter is the theoretical line length of a rafter is ________
A) The actual calculated length after the rafter is lengthened by half the thickness of the ridge board
B) The actual calculated length after the rafter is increased by twice the thickness of the ridge board.
C) The total calculated length before the rafter is shortened by half the thickness of the ridge board
D) The total calculated length after the rafter is shortened by half the thickness of the ridge board
C
You might also like to view...
____ is the minimum distance required between the structure and the property line.
A. Holdback B. Retention C. Placement D. Setback
The bead width should not be more than ____ times the rod diameter.
A. two B. three C. four D. five
All pesticides must include on the label the use _____________________, which specifies who can apply the pesticide
Fill in the blank(s) with correct word
CMOS uses
A) n-channel and p-channel E-MOSFETs B) E-MOSFETs and D-MOSFETs C) n-channel and p-channel D-MOSFETs D) dual-polarity supplies