A 10-bit flash A/D converter would require ________ converters
A) 1023 B) 511 C) 2047 D) 4095
A
You might also like to view...
An attribute is best described as:
a. a cause of unpredictable variation that can be identified using structured techniques. b. a process characteristic that can be checked or counted. c. the highest point established as the top specification on a control chart. UCL X-bar = Average X-bar + (A2 X Average R). d. are boundaries that tell you if the process is in control.
At 8:00 one morning you set out on a road trip. You travel 155 miles before stopping for lunch at 11:18. At 12:07 you start driving again, and travel 124 miles before stopping for gas. It takes ten minutes to buy gas, and you drive another 94 miles before stopping for the day at 4:30. What is your average speed for the whole day?
What will be an ideal response?
The first step in using any height gage after cleaning the surface plate, is to check the:
A) Base for cosine error B) Vernier alignment at the top of the beam scale C) Alignment of the vernier and beam scale zero indexes D) Column for perpendicularity
When voltage is increased:
A) Voltage and current are not related B) Current is decreased C) Current is increased D) Current stays the same