What is used to stop the countershafts for a shift in a RoadRanger AMT if the clutch is either defective or out of adjustment?
A. nothing, gear clash will result
B. inertia brake
C. clutch brake
D. snubber valve
Answer: B
You might also like to view...
A service consultant suggests the brake pads be replaced because they are at 3/32 of an inch in thickness and the customer will engage in heavy driving before the next service. This is an example of:
A. Preventative maintenance B. When doing a repair, this is a related service and part sale C. Common maintenance special offered during checks-in D. Pre-priced maintenance menu item based on vehicle mileage
The normal current rating of a circuit breaker is located _____
a. in the panelbox b. on the bottom c. on the handle d. on the side
The practical unit of electrical charge is the ____.
a. watt b. ohm c. volt d. coulomb
A ramp from an expressway with a design speed of 30 mi/h connects with a local road, forming a T intersection. An additional lane is provided on the local road to allow vehicles from the ramp to turn right onto the local road without stopping. The turning roadway has stabilized shoulders on both sides and will provide for a onelane, one-way operation with no provision for passing a stalled vehicle. Determine the width of the turning roadway if the design vehicle is a single-unit truck. Use 0.08 for superelevation.
What will be an ideal response?