A high-impedance meter _____________
A) Has a high internal resistance B) Measures a high amount of resistance
C) Can measure a high voltage D) Measures a high amount of current flow
A
You might also like to view...
This type of casting refers to a process in which a steel or iron mold can be used many times and produces a better finished quality than with sand casting.
a. centrifugal casting b. die casting c. permanent casting d. sand casting
The brake assist system (BAS) is activated ________
A) Whenever the brakes are applied B) During a panic stop C) On the rear brakes D) Only in the rain
Which of the following is a step in checking a system's defrost cycle?
A) Clear the area around the outdoor coil. B) Turn off the pressure switch. C) Set the defrost thermostat to a higher temperature. D) Short the test pins together.
What is the output voltage at the end of the input pulse from an RL integrator that uses a 400 mH inductor, a 5 k? resistor and a 5 V, 1.2 ms input pulse?
A) 4.532 V B) 5 V C) 3.16 V D) 4.75 V