Accurate cutter positioning on a workpiece is accomplished by:

A) Using a precision square B) Using the machine dials
C) Holding the workpiece in a vise D) Locating the cutter with an accurate steel rule


B

Trades & Technology

You might also like to view...

The Brayton cycle engines ____

a. have an efficiency of almost 67% b. are less efficient than a Rankine engine c. are also known as gas turbines or jet engines d. is based on a closed system

Trades & Technology

Torque is expressed in units of ________

A) Foot-pounds per minute B) Foot-pounds C) Pound-feet D) Pound-feet per second

Trades & Technology

Air in the brake hydraulic system can cause all of these EXCEPT ________

A) Spongy brake pedal B) May require the driver to "pump up" the brakes before they will stop the vehicle C) Lower than normal brake pedal D) Hard brake pedal

Trades & Technology

A(n) ____________________ is a device that serves as a temporary buffer memory.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology