(2a2b)3 = ____

A. 4a3b3
B. 8a6b3
C. 8a6b6
D. 4a6b6


Answer: B

Trades & Technology

You might also like to view...

Which step should be performed LAST when diagnosing an engine performance problem?

A) Performing a thorough visual inspection B) Verifying the repair C) Checking for any technical bulletins D) Checking for any stored diagnostic trouble codes

Trades & Technology

A corner finisher operates on the same principle as a flat finisher or nail spotter, but its dispensing surface

has an angle of _____. a. 30 degrees b. 45 degrees c. 90 degrees d. 120 degrees

Trades & Technology

All of the following statements are true EXCEPT:

A. Pad lining thickness should never be checked with the caliper in place. B. The thinner the pad lining is, the more rapid the wear will take place. C. Uneven wear indicates that the pads are not sliding properly. D. Uneven inner and outer pad wear can indicate a problem with the caliper piston not retracting or the caliper itself not releasing.

Trades & Technology

When constructing which type of foundation system must a builder find the air-freezing index from IRC Table R403.3(2)?

A) Stepped foundation system B) ICF foundation system C) Frost-protected shallow foundation system D) Monolithic foundation system

Trades & Technology