Set-up time specifies ________
A) the minimum time for the control levels to be maintained on the inputs prior to the triggering edge of the clock in order for data to be reliably clocked into the FF
B) how long it takes the output to change states after the clock has transitioned
C) the maximum time interval required for the control levels to remain on the inputs before the triggering edge of the clock in order for the data to be reliably clocked out of the FF
D) how long the operator has in order to get the flip-flop running before the maximum power level is exceeded
A
You might also like to view...
Wildlife must be strictly managed to ensure that proper populations of the various species are maintained
Indicate whether the statement is true or false
Which one of the following is NOT one of the major control objectives?
A) Stability B) Produce desired transient response C) Smooth and quite operation D) System robustness E) Reduce steady state error
What type of fastener can be threaded into a nut?
A) Wood screws B) Lag bolts C) Sheet-metal screws D) Bolts
The difference between wet-bulb and dry-bulb temperature is called _________________________.
Fill in the blank(s) with the appropriate word(s).