All of the following statements are true EXCEPT:
A. when replacing a bearing, use a press and support the outside of the bearing with a bearing separator.
B. the drive gear for the VSS or speedometer is located on the output shaft.
C. synchro sleeves wear either on the outside edge of the tooth or on the inside, partway into the sleeve.
D. when synchros have experienced wear, the teeth on the corresponding gear could also be worn.
Answer: A
You might also like to view...
50mm to inches
What will be an ideal response?
Why are computers used for sire and dam selection?
What will be an ideal response?
Kinetic energy is ________
A) The energy needed from the batteries to propel a vehicle B) The energy that the motor produces to propel the vehicle C) The energy in any moving object D) The energy that the driver exerts on the brake pedal
Answer the following statement(s) true (T) or false (F)
1. A 1° temperature difference in Celsius is equal to a 1° temperature difference in Fahrenheit. 2. For both the forced and the free convection situations, the overall heat transfer rate between the fluid and the surface is governed by Fourier's law of cooling. 3. All matter emits thermal radiation. This rule is true as long as the body in question is at a nonzero absolute temperature. 4. Most conventional fuels that we use today to generate power come from coal, natural gas, oil, or gasoline. 5. A degree-day (DD) is the difference between 65°F (typically) and the average temperature of the outside air during a 24-hour period.