Mr. Sanchez used an eight-row combine with a 30-inch-row header to harvest his corn. Hetraveled 4.2 miles per hour. He had a yield of 132 bushels per acre. The harvesting efficiency of the field is 0.82. Calculate the harvesting capacity using the following formula:
HC = (S × W × EFF × Y) ÷ 8:25
Where: HC is the harvesting capacity, bu/hr.
S is the combine speed, mph.
W is the combine harvesting width, ft.
EFF is the harvesting efficiency of the field.
Y is the yield, bu/acre.
1,102 bu/hr
You might also like to view...
What is used on an HPI-TP injector to prevent back-pressurizing of the fuel rail by the metering chamber when the injector is first actuated (pre-injection) by the camshaft?
A. fueling check valve B. timing check valve C. fueling orifice D. timing orifice
Technician A says that a two-wire variable resistor is called a rheostat. Technician B says that a three-wire variable resistor is called a potentiometer. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
Technician A says that carbon fiber driveshafts need support bearings every 24 inches. Technician B says that carbon fiber and aluminum driveshafts reduce rotating mass and are more efficient than steel driveshafts. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
List the types of loops geothermal heat pumps can use
What will be an ideal response?