What is the size of part number 5?
Refer to the girder brace in Drawing Number W11784S R1.
3?4?? thick x 12-19/32?? wide x 42-1/2?? long
You might also like to view...
PROBLEM 3.102
A 18-mm-diameter solid circular shaft is made of a material that is assumed to be elastoplastic with and For a 1.2-m length of the shaft, determine the maximum shearing stress and the angle of twist caused by a 200-N ? m torque.
Why are heated diode leak detectors better than corona discharge leak detectors?
A) Heated diode leak detectors use infrared lights in leak detection. B) Heated diode leak detectors can detect greater amounts of coolant. C) Heated diode leak detectors are not as prone to false alarms. D) Heated diode leak detectors are less expensive to replace.
Solve and round to four decimal places, 4.699 x 1.011 = ____.
A. 4.1123 B. 4.7507 C. 47.5068 D. 4.3827
Using the cross-sectional method, determine the cuts and fill for the project. The grids are 50 feet apart in both directions. The existing grade appears above the proposed grade. Express your cuts in bank cubic yards (bcy) and your fills in compacted cubic yards (ccy).
What will be an ideal response?