The steps to connect PVC and CPVC pipe include:
A) Apply the solvent and then fit the pipe. B) Prime, fit, and then apply solvent.
C) Clean, prime, apply solvent, and fit the pipe. D) Fit, clean, prime, and apply the solvent.
C
You might also like to view...
How many welds are required?
Review drawing number 523708C0A and then answer the question.
A triaxle trailer is equipped with five S-cam, slack adjusters, correctly set at an effective length of 6 inches and one incorrectly installed at 51/2 inches. How much less brake torque will be applied at the brake with the incorrectly set slack adjuster when the service application pressure is 100 psi on a 30-square-inch chamber?
A. 150 in.-lb. B. 1,500 in.-lb. C. 15,000 in.-lb. D. 15,000 in.-lb.
Before brazing, the outside of the tubing should be cleaned to a _____
a. satin finish b. dull finish c. bright finish d. dark finish
Which type of drive axle tires can be used to increase traction on slippery surfaces?
A. steering tires B. slicks C. lugs D. worn tires