Which of these is NOT a normal diagnostic step when troubleshooting a transfer case problem?
A) Check sensor data with a scan tool
B) Remove and inspect the front driveshaft
C) Check the fluid level
D) Measure the tire circumference
B) Remove and inspect the front driveshaft
You might also like to view...
Switching computers and peripherals completely off when not in use requires connecting the system through a(n) ____________________ or outlet that has a cutoff switch.
Fill in the blank(s) with the appropriate word(s).
Clay and concrete tiles are generally laid in _________.
A) single coverage with a 5-in overlap between the top and bottom shingles. B) double coverage with a 2-in. overlap between the top and bottom shingles. C) triple coverage with no headlap. D) double coverage with a 2-in. headlap between the top and bottom shingles. E) none of the above.
One-time-use forms for round columns are made from _____.
a. fiber b. plastic c. fiberglass d. plywood
What is the maximum allowable temperature for a tub and shower valve, and what device is allowed to control that temperature?
What will be an ideal response?