Using the procedure outlined in the book lay out a rectangle measuring 1' x 24" onto a flat surface. What are the dimensions of the diagonals? Round the answer to the nearest hundredth.
What will be an ideal response?
2.24'
You might also like to view...
A K-series steel joist that is 20 in. deep cannot be used to span more than
A) 20 ft. B) 25 ft. C) 40 ft. D) 30 ft. E) 35 ft.
Before removing the piston and rod assembly from the cylinder block, you should do all of these, EXCEPT ________
A) Make sure the rods are marked to their respective cylinders B) Remove the cylinder ridge with a ridge reamer C) Notch the top of the piston for identification D) Install rod bolt protectors
Technician A says that a blower motor can be tested using a fused jumper lead. Technician B says that a blower motor can be tested using a clamp-on ammeter. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Which of the following can be used to keep a file from pinning?
A) Cutting oil B) A thin coat of bluing C) Chalk D) Vegetable oil