A(n) ____ works with the structural designer to optimize and harmonize the interior design of structures.

A. architect
B. engineer
C. drafter
D. interior designer


Answer: D

Trades & Technology

You might also like to view...

If you feed out ten feet of wire electrode and cut it off, and then lay it on the floor where it forms a circle, it does not lay flat. One end is higher than the other, and this height is known as the ____________________ of the wire.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

How can competitive livestock evaluation help participants develop life skills?

What will be an ideal response?

Trades & Technology

The CAN protocol will never be a required protocol for all manufactured vehicles.

Answer the following statement true (T) or false (F)

Trades & Technology

A 3-phase, 60Hz, 50km long, completely transposed transmission line is built using Drake conductor. Drake conductor has an outside diameter of 1.108 inches; stranding of 26/7 (Al/St), which yields a GMR for the conductor of 0.0375 feet. Resistance at 60-Hz for this conductor is 0.117 ?/mile. A horizontal tower configuration is used, with a phase spacing of 25 feet (25 feet between left and center phases, 25 feet between center and right, and hence 50 feet between left and right). Bundling is used, with 2 conductors per phase, spaced 1 foot apart. For reference ยต0 = 4? x 10-7 H/m and ?0 = 8.854 x 10-12 F/m.

a) Find the positive sequence inductance in H/m and inductive reactance in ?/km. b) Find the capacitance to neutral in F/m and the admittance to neutral in S/km. Neglect the effect of the earth plane. c) Since the line is 50km, we can make the short line approximation. Draw the short line ? equivalent circuit, labeling appropriate values.

Trades & Technology