The voltmeter and ohmmeter are generally contained in the same meter. These meters are called ____________________.
Fill in the blank(s) with the appropriate word(s).
multimeters
You might also like to view...
What special precaution must be observed when holding a workpiece with double sided tape?
A) Grinding fluids must not be used with double backed tape holding the workpiece B) The magnetic flux must be increased to compensate for the non-magnetic characteristics of the tape C) The part needs additional blocking on sides and ends D) All of the above
An R410A system specifies a superheat of 10°F at the current operating conditions. The technician measures a suction pressure of 130 psig and a suction line temperature of 45°F. The system is
A) undercharged B) overcharged C) charged correctly
Steel is used for reinforcement because it _____
a. will not corrode b. has nearly the same temperature expansion and contraction rate as concrete c. has a lower temperature expansion and contraction rate than concrete d. is inexpensive
Which one of the following address elements is not used for the physical address of a Logix tag?
A) Rack: Rack is the rack number where the process is located. B) Type: Type specifies four types of data. C) Bit: Bit specifies the terminal on an l I/O module. D) Slot: Slot is the slot number of the I/O module.